Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Update your rig status here!
Cool!!
Reply
A problem that seemed as thought it was a turbocharger, turns out to be a catalytic converter.
Reply
the 351 windsor is out and on the stand being cleaned up and checked thru out so i dont fall into same hole as i did with my"fresh" 22r .

man so far im blown away on how clean and tight this motor was ..no oil or sludge build up super clean ... the valve covers looked new inside the manifold looked good as new no sluge or build up either .. looks like the motor was barley used ..

so im going to put all new gaskets and water pump on and run it ..

tomarrow i will have fresh pics for you ..
Reply
1" Body lift installed

Steering Skid installed

Next-- Spare tire and gas can carrier
Reply
Ok, 1985 GMC Jimmy bought, it has the 305 5.0L V8, not quite the 350 but still plenty good enough. Just have to get it running, then the cutting begins!!! 40 inch swampers, thats the high goal. well maybe just 38's
Reply
Cool! Congrats.
Reply
Congrats Mr.Anderson,its not a ranger but i guess it will do.
Reply
Yeah but who knows maybe one day the Ranger will get some attention too. Just need to keep a vehicle running so I can go pick up parts and get places.
Reply
Rear Swing away installed :yes:
[Image: picture_002.jpg]
[Image: picture_003.jpg]
Reply
Awesome Big Grin
Reply
that looks great Ron. Did you fab this up?
Reply
that is nice Ron, I to am intrested in where you acquire it.
Reply
I'll tattle.
http://www.orfab.com/tirecarrier.htm
Reply
danger ranger got explorer springs rear, torsion bar lift front. 31 inch (about) tires. bent my exhaust ppe at the cushman flats, so im cuttin it and puttin a glasspack on
Reply
why a muffler at all?? :whistle:


turboL Wrote:danger ranger got explorer springs rear, torsion bar lift front. 31 inch (about) tires. bent my exhaust ppe at the cushman flats, so im cuttin it and puttin a glasspack on
Reply
sevenslats Wrote:I'll tattle.
http://www.orfab.com/tirecarrier.htm

Thanks Geoff, you are correct!
Reply
hillbillydodge Wrote:why a muffler at all?? :whistle:

Your engine needs some backpressure to produce torque. Put it on a dyno with no muffler or cat, and your horsepower will be higher, but torque will be pathetic.

Note: I'm doing this with a Diesel, but it's got a turbocharger to give it some backpressure to work against.
Reply
I run a cat but no muffler :whistle:



AKMark Wrote:Your engine needs some backpressure to produce torque. Put it on a dyno with no muffler or cat, and your horsepower will be higher, but torque will be pathetic.

Note: I'm doing this with a Diesel, but it's got a turbocharger to give it some backpressure to work against.
Reply
hillbillydodge Wrote:I run a cat ...:whistle:

want to take my dogs for a run too?
Reply
sure you take my 2 and ill take your 2 1/4 Big Grin


gijoey Wrote:want to take my dogs for a run too?
Reply
AEV / Nth Degree Tummy Tucker ordered. I'm not planning on body lift so I went this route. My transmission mount is fried so I'm doing this sooner, not waiting for the springs and tires.

Sorry, Ron, I pretty much had to choose between this and that swingaway I asked you for pricing on.
Reply
no problem Steve. I thought you had to have a BL if you were going to run a Nth tummy tuck but I just read their page (says usually you wont need one). I wonder how they got away with that. I for one was sad to see Nth sell out.
Reply
Did they actually "sell" out. I thought they were just too small to keep profits up enough to stay in business. They're stuff is amazing but you also payed for what you got and there were just too many big guys out there selling pretty good stuff cheaper. It seems everyone was happy that AEV picked up the designs. The stuff will still be available (at similar pricing) and you know AEV will keep the quality up.

Imagine a Brute with a 5.7hemi, an Nth Degree long-arm kit, and 44's...I would almost contemplate selling the GB to help pay for a build like that...almost.
Reply
Soft top on Hard top off, here I come summer time!
Reply
here's the current stats on my rig:

79 Ford HP D60 , 4.56 gears, Detroit, prototype tnt truss, hi-steer, blah blah
CUCV 14bolt, 4.56 gears, detroit, custom trussed
40inch IROKS on 12 bolt H1 wheels recentered w/ custom rockrings
custom cage
roof halo
231/D300 4:1 doubler
corbeau seats
fully reinforced frame front to rear
hydro assist
clayton long arm

here's my thread on pirate:
http://www.pirate4x4.com/forum/showthread.php?t=572710
Reply
Lookin awesome! Nice writeup on pirate too. Looks like you need some new AO stickers to replace the ones you had on the back window.
Reply


Forum Jump:


Users browsing this thread: 23 Guest(s)