10 Mar 07, 07:45 pm
FSJ's rear window has been repaired. It wouldn't move because the switch that allows the window motor to get power wouldn't engage. I removed and essentially hotwired it and got the gate open, then was able to rewire it so the switch isn't in there anymore. The window doesn't go smooth yet, but when it's warmer I'll clean out the tracks and that should help a lot.
Seafoamed the carburator and it quit blowing carbon out the pipe. I lowered the idle as it was too high. Plugged in about four vacuum lines, don't know if they were in the right places yet, but I'll get it figured out.
Found a factory service manual in the backseat. YIPEE!
Still need to:
Oil change
I/M
Registration
Fix T-case linkage (some is missing)
Fix speedometer cable
Fix defroster (currently stuck on floor setting)
Replace washer fluid bottle, (old one was cracked).
Seafoamed the carburator and it quit blowing carbon out the pipe. I lowered the idle as it was too high. Plugged in about four vacuum lines, don't know if they were in the right places yet, but I'll get it figured out.
Found a factory service manual in the backseat. YIPEE!
Still need to:
Oil change
I/M
Registration
Fix T-case linkage (some is missing)
Fix speedometer cable
Fix defroster (currently stuck on floor setting)
Replace washer fluid bottle, (old one was cracked).