Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Update your rig status here!
HAHA. I think the words "told you so" are very appropriate here.
Reply
get the taillights done today, then all (I) will need to do is get my spare tire to TDS...

hint hint hint
Reply
whats wrong with ur spare??? i got a friend that works there i might be able to get it fixed for nothing.
Reply
Thanks to a sick wife and kids, didn't get anything done this weekend on my rig. Guess I have to get it fixed this week.
Reply
Got inner axle seal done, Knuckle boot is shot so i will have to pull it down later to finish it up.

New defroster motor in and T-case shifter boot done.

Oh and repaired spare T-case rear out put bearing was bad.
Reply
replaced the thermostat, fixed the stock gauge and got the triple gauge set working, so far no leaks and everything seems to work fine, Aussie locker on order I don't think it will be here in time for the run, and I still need to wire up the CB, GPS, buy a new fan shroud, make a mount inside to hold my winch and fill it up. Then all I will have to do is make bumpers, rock sliders, roof rack, tube fender flare, ????????

At least its working for now.Big Grin
Reply
AKMark Wrote:Thanks to a sick wife and kids, didn't get anything done this weekend on my rig. Guess I have to get it fixed this week.

u need any help working on ur rigs let me know i really dont have anything to do... NO JOB lol.
Reply
wish I had a wife to blame my lack of activity on...

hahaha :lol:
Reply
ZMonster Wrote:get the taillights done today, then all (I) will need to do is get my spare tire to TDS...

hint hint hint


whats wrong with ur spare tire.... i got a goood friend that works at tds
Reply
Summit Saturday was amazing
Spent most of today getting the rear quarter off of the parts blazer, with any luck it wil be welded onto the fixer by the end of the week.
Reply
Front diff pulled apart. Bad o-rings are the culprit to the ARB not working. Headed to town tonight or tomorrow to get some from a buddy.

Winch torn apart, cleaned, and waiting to find the grease to put it back together. Man the grease that was in there was the thickest stuff I've ever seen. After taking this apart I see why it can be better than some. The brake assemble for one beats the drum style in warns and others. It is a spring loaded assemble that doesn't use pads or anything like that. When it goes to rotate the opposite direction it hits a stop and wont move. Also waiting on switches to wire in the in cab winch controls. I'll get another remote down the road, mnie got busted. The plug end met a tree and te remote met a dodge.
Reply
The arb is fully operational. First time in almost a year it has worked right. Two stuid o-rings was the only problem. You can't use regular orings. they are a special material and aren't round. Anyways it works. Still waiting on the bill for them and hope it isn't too much.

Winch still can't find the grease. I finally figured out which kinds to get but can't find it in town. So tomorrow I'll hit up some more specialty shops, if they are open, and hopefully find it.
Reply
Ask Ole, He had some grease for his Warn winch.

Got new to me tires mounted on rims waiting on lug nut to put them on Zuk.
Reply
Yeah he used valvoline syn power #986. No one that was open today had it. Napa only has #985. I'm going to hit up some shops tomorrow if they are open and see if I can find it or another grease like it.
Reply
Mel, I was really happy with how the Warn controller worked out on the T-Maxx winch I had on the Grizzlybeaver. (of course it was already sold by that time, but it worked GREAT) It was basically combining the better parts of the 2 brands. Even the people at Redding call those T-Maxx boomer boxes "cheap, made in China carp". You're right, though, the business end of a T-Maxx is some heavy duty $#!t.
Reply
I like the boomer box. What makes it better is the fact it is a solid state instead of individual solenoids. the remote well not the best. I'll be wiring in the in cab controll and still waiting on a regular remote for back up. May just make my own.
Reply
Yeah, they're super cool, I'm not arguing that at all. Having that wireless setup was awesome when Ole and I pulled that FSJ onto a trailer. It's just that the wiring and assembly is done by drunken monkeys and the electronic components are cheap junk. You're pretty much hosed if the little computer chip brain fries on the trail... mine blew in the driveway, luckily.

Lemme bust a rhyme about that situation for ya... No little jumper wires to pull in a pinch...just a mutha-frackin' dead @$$ winch.
Reply
Actually you can use wires. It's the same concept as wiring in a cab control. I don't really care about the wireless. I never used it. Then the remote and reciever wouldn't talk togeth right and it wouldn't go in wireless but worked fine with it plugged in. The chip can (and will be in mine) bypassed. That chip is only for wireless.
Reply
ACOS on the rear, nicely side-to-side leveled TJ with a slight rakish angle.

Ready for the next phase.... Smile
Reply
once again i got a new vehicle, its a ramcharger, so tuning the carb and then just driving it, anyone know how to lift these things for cheap?
Reply
Body Lift. I had a 79, I wish I never sold it!
Reply
Some mud flaps to keep johnny law happy and working on a lightweight trail groomer. Needs some more weight to work better. It "floats" a little to good on the harder snow.
Reply
Yearly oil change performed on the dodge. New air filter but bought the wrong one.
Lost keys to every vehicle I own. And it's expensive to replace the one for the dodge and the key fob.

XJ still has a power drain on it and I haven't had time to look at it.
Reply
Thanks to Don for coming out twice now I have two transmission sitting on the garage floor. Today we got mine out. I put my t-case on it and replaced my flex pate as the holes were sort of egg shaped. The torque converter bolts weren't very tight. But I hit another snag as I have for the past two weeks. I had to quit to run some errands and now have to clean up and be ready to be called in. After our easter stuff tomorrow I'll get it pu in. Then to start getting the winch reinstalled.
Reply
got my gas tank installed, got the fuel lines ran, took the tranny line off and pointed them to the back and hooked up, got my hood pins on and working order, got my mini spool in now i got my posi rear. im getting things done on the FEEP slowly but surely im just freaking out about the wireing lol
Reply
Pulling BIGBOY into the garage in a few minutes to start the upgrades.
Reply


Forum Jump:


Users browsing this thread: 9 Guest(s)