Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Update your rig status here!
Drivers drop are more common than my pass drop... thats why I am scratching my head. I wasnt wanting to drop any money on the zuk for a while.. but a pair of 44s with pass drop for $150.......
Reply
I have a bunch of pass side drop 44. it's the driver thats hard to find.
Reply
Really?.. in that case.. I'll hold off. I dont need em now.. but if it was a good deal I'd snag em... so you got a pair of pass 44s eh?..


This is the pm I got

Quote:need to buy new spyder gears ($107.00)
and a carrier bearing set ($35.00)
i am in the process of robing the spyder gears on it and the axle's are already out of the rear-end
do you have any spyder gears?
if you just want the front & rear (- the spyder gears) and one backing plate
the rear end also needs an outter axle bearing
$100.00 for the pair or
$142.00 with spyders in it
i have a 74 cherokee complete PARTS RIG no title
front and rear complete also, i think they are 44's?
no title, radiator, or tires
good running straight 6, 3 speed man.
$150.00 for the whole rig!
Reply
LNS Email me with a list of what you need.

holeski@holeproofindustries.com
Reply
I was just looking at his axles.. I eventually want to do an axle swap locked front and rear. Wink
Reply
ordered front ubolt plates and ubolts for brown truck... should have the truck rolling soon????
Reply
It's been a while, but I did a little trimming on the fenders to fit my tires (no new flares yet). I added 3 inch add-a-leaf and 2 inch spacers for the front. I already had a 3.5' Pro-Comp installed. Mounted my high-lift to my bumper, it took up too much room inside the vehicle. I added 4 New KC lights, the others broke in the cold weather, gotta love Alaska!

SHOTGUN
Reply
Well, the Rock sliders are on, now to sell the 31's and order some 33's. I'm also inheriting a set of 35's, but don't know that they will fit, so I'll sell them when I get them.


[Image: set126019gy.jpg]

[Image: set126027rd.jpg]

[Image: set126038yf.jpg]

I'll test them out later!
Reply
LNS - did you realize you have a divorced t-case? This actually opens up many options on drivetrian and axles! You could easily swap any motor and 2wd trans and keep your t-case (although I don't know the strength of that t-case - just that it is 4:1 IIRC) this also makes an easier t-case swap (I also have a 205 divorced case. As Eric said, Pass drop axles are more commono. I have a set of 1/2 tons as well as a set of 1 tons (Dana 60/70) available.

Just adding options to your thoughts to confuse your mind even more.
Reply
As for my rigs - yard is down to 23.

Burban is at IM office - nervously awaiting results form Mr AKDSMR.
Reply
good stuff Kev! Get that beautiful beast rollin!
Reply
ChevyKev Wrote:As for my rigs - yard is down to 23.

Burban is at IM office - nervously awaiting results form Mr AKDSMR.

Front dampner seal is leaking and sending the oil back towards your starter. Tightened you fuel pump and oil pan bolts. Rearraigned a couple of vacuum lines (but good job by the way). Tied up the tranny pan heater so it isn't wearing out your front driveshaft Wink .

Now the bad news....on second thought, you had better call me. I'll find your number here in a couple of minutes if you don't ring me.

Some good news....I just save a bunch of money by getting insured by Geico! Oh you also have 5 boxes of dishes in the back of "the Burban".

More bad news... TAC Actuator bad (won't hold vacuum). Engine has a misfire (but won't be a reason for failure)
Good news... I fixed the EFE valve so that it opens and closes.

More bad news...The Thermostatic fan doesn't work. It starts to overheat as I try to find the source of the misfire.
Reply
Quote:Now the bad news....on second thought, you had better call me. I'll find your number here in a couple of minutes if you don't ring me.

Doh!
Reply
Okay, who has Chev Kev's number?
Reply
488-6664
Reply
Thanks Micheal... Now he just needs to answer the phone.
Reply
Well, i just traded in a 2004 TJ X model for a 2006 Rubicon. I haven't done much, yellow top optima battery, CB, and fire extinguisher this weekend.

Next upgrades will be..
front and rear bumpers
Winch
skid plates

I will prolly leave the stock rims and tires for right now. I would like to go with a 4.5 super flex from RE. I want to do a little more research on lift kits.

I would like to become a member, and i am planning on making it to the next meeting as well as the next trail ride (work and school) permitting. I want to see what a stock rubi can really do.

Pete
Reply
:banghead: Next mod to Burdban - shotgun holes in the rear doors.
Reply
99 XJ M/T with:
Tubular Nerf Bars
3" Lift
31" Mud Rover's
BDS Steering Stabilizer
Tint/Auto Start/Etc.
Rear bumper/swing-away tire mount (NEW!)

Future Mods include:
FRONT BUMPER http://www.nates4x4.com/catalog/product_info.php?cPath=25&products_id=37
WHEEL SPACERS (1.25-1.5”Wink
CRUISE CONTROL
FACTORY or THULE ROOF RACK
SWAY-BAR DISCONNECTS
MSD 6A IGNITION BOX
K&N INTAKE
REAR CARGO MAT
REAR POWERTRAX NO-SLIP LOCKER
3” ADDITIONAL SUSPENSION LIFT
- Once shocks & springs require replacement
CLEARCOAT PAINT
- Once vehicle needs repainting
Reply
Oh yeah...got some nifty tri-beam aux lights (Fog/driving/parking in 1) too. Took me 2 days of wiring, then $200 to have the pros unwire it and rewire it correctly! :mad: They're just lights!!! Who knew.

At least I don't have 23 broke vehicles in my yard.lol
Reply
have a funky shaking in the front on the highway, comes and goes. Had it checked out, nothing was loose, could have some play in the steering box, probably an alignment issue, or an off-balance wheel. Greased up the tie rod linkages, looked at the shot steering stabilizer a little more before deciding to procrastinate on that one, and drove home. Hopefully nothing bad will come of it. My passenger side knuckle grease boot thing has a hole in it, but it only has to last another year anyway.

Other than that, the thing is running like a champ.
Reply
I just stopped by Dave's to see him. He wasn't home, but the X was. Apparrently, I was the last to know this but, the X made a trip to NXC for a Stinger. Looks cool man, welcome to the club. :allrighty:
Reply
ChevyKev Wrote:LNS - did you realize you have a divorced t-case? This actually opens up many options on drivetrian and axles! You could easily swap any motor and 2wd trans and keep your t-case (although I don't know the strength of that t-case - just that it is 4:1 IIRC) this also makes an easier t-case swap (I also have a 205 divorced case. As Eric said, Pass drop axles are more commono. I have a set of 1/2 tons as well as a set of 1 tons (Dana 60/70) available.

Just adding options to your thoughts to confuse your mind even more.


Big Grin
so many options... no money to do them..
Reply
I don't think I have ever posted in this thread. Well here goes Big Grin.
With me it's more, so many options and not enough time.
I have to complete in one month, new rear bumper and tyre carrier/swingout/down, removable flares for legality, huge ass mudflaps(flat towing the Miata), new rear hatch area and install tailgate again, thinking about getting a fourth 36'er and installing those, make cb work, add a few bars to 'cage, mount co2 tank, install lift motormounts, I think there is a few other things but...
Reply
I need to know if everyone thinks this would be a good investment. Confusedhrug: Only one I could find. http://www.rocky-road.com/airlocker.html the total for all parts came to $1040.78 plus $71.80 for shipping. Confusedcrambled:
Reply
Most definitely.


Check trailtoyz. I think he sells ARB stuff for pretty cheap.
Reply


Forum Jump:


Users browsing this thread: 13 Guest(s)