Adjustable upper and lower control arms

[ak_petey]

the length of the arms is not the issue. the caster is causing the camber to be off. which brings about death wobble. adjusting it may cause the pinion angle to be troublesome in the future, but the death wobble is most certainly more of an issue at the moment. Many of my parts are adjustable so there wont be major geometry changes.
If the pinion angle becomes terrible, I may resort to a shorter dual rate spring from Don Thuren. I see this as a win win situation because I would lower my COG, and correct my pinion angle, AND still have plenty of room for my 42 inch iroks.

with that info. please comment. anyone

---------- Post added at 01:56 am ---------- Previous post was at 01:53 am ----------

These are the coils I was thinking of getting:
http://thurenfabrication.com/ctdcoils.html

I am in need of some new shocks as well. the don thuren shocks should provide 10" of travel. not sure what the springs will provide.