Help No Breaks!

[Angler]

From your post it looks like you didn't replace the master cylinder. If the fluid was allowed to escape your FIRST bleed is to bleed the master cylinder. The best way is with a bleeder kit that allows you to screw into the outlets and run hose back into the master. Plastic and cheap at NAPA. Then work the rest of the bleeding.

OK the brakes are working now, I had the calipers on the wrong side, I swapped them and Darrick came by and helped me bleed the brakes, I got brakes now, i probably should still bleed the master cylinder but that will come after the ride.