+- Arctic Offroad Forums (http://www.arcticoffroad.com)
+-- Forum: Talk (http://www.arcticoffroad.com/forumdisplay.php?fid=3)
+--- Forum: General 4X4 (http://www.arcticoffroad.com/forumdisplay.php?fid=9)
+--- Thread: CB Install and testing party (/showthread.php?tid=6801)
CB Install and testing party - AKMark - 10 Nov 14
I would've posted this in the Open forum, however I have no permissions to post there. :pcsmash::fishslap:
Was thinking of holding a CB install and testing party at my shop in North Pole this winter. I figured I'd wait until after the holiday season, to give everyone a chance to spend that time with loved ones.
We can fit at least 2 and up to 4 (if they are small) rigs in there. I have an SWR meter as well as soldering equipment, multimeter, power probe, etc to assist with install.
I wouldn't be against someone working on lighting as well.
If you have a bigger project, let's save that for another time, just don't be afraid to ask.
Any interest in this?
CB Install and testing party - ak_petey - 10 Nov 14
I need to install one in the dodge
CB Install and testing party - AKMark - 10 Nov 14
If you have the equipment, let me know when you are ready to install.
If you need equipment, we can sit down and get you some stuff.
There's a nice Cobra on one of the local FB pages for $40.
I really like the Uniden I have for the DMax, it's got the NOAA weather channels as well.
CB Install and testing party - Dan Cole - 12 Mar 16
Anyone else in the group run a HAM radio in addition to a CB?
KE0DYM
Sent from my SM-G900V using Tapatalk
CB Install and testing party - akram - 12 Mar 16
No but want to. A couple of us went to the local radio club meeting once. Wanted to get one for the club. The clubs down south have a freq for them.
CB Install and testing party - 88XJ - 12 Mar 16
I installed one, have a couple more handhds that I bought, but I have not earned my license yet so I can actually play around with them. Nice keep, I might have to check out your POD Cast.
CB Install and testing party - Dan Cole - 13 Mar 16
The Arctic Amateur Radio Club is offering a class soon and that could get a bunch of people their license. I'll share the class info once I find it.
If just seems that all Alaskan offroaders should be using a HAM radio instead of a CB because of the ruggedness and distance that we travel.
Sent from my SM-G900V using Tapatalk
CB Install and testing party - Dan Cole - 13 Mar 16
Here's the info for the HAM operator class:
Please help spread the informationâ¦.
:: Notice - Upcoming Technician License Class Begin In April ::
Tech License Classes will be held each Saturday in April ( April 2, 9, 16, 23, and 30 ) from 1 to 5 PM in Hutchison Center, Room 202.
John Slater (KL1AZ) will be lead instructor with Eric Nichols (KL7AJ) and Neal Brown (W7USB) helping. Please come to the AARC April 1st club if you are interested in attending the classes.
Mike Perry has offered to hold licensing exams on April 30 during the last class. License testing is also available on April 2 and again on May 7 which is the ânormalâ Saturday License testing time-frame. Please contact John Slater at techclass@kl7kc.com for additional information.
Cheers
Sent from my SM-G900V using Tapatalk
CB Install and testing party - Dan Cole - 13 Mar 16
88XJ Wrote:I installed one, have a couple more handhds that I bought, but I have not earned my license yet so I can actually play around with them. Nice keep, I might have to check out your POD Cast.If you have an iPhone or Android phone is really easy to subscribe to the podcast. You can also just hit the play button on the website and listen that way. Check it out and let me know what you think.
Sent from my SM-G900V using Tapatalk
CB Install and testing party - 88XJ - 13 Mar 16
Dan Cole Wrote:The Arctic Amateur Radio Club is offering a class soon and that could get a bunch of people their license. I'll share the class info once I find it.
If just seems that all Alaskan offroaders should be using a HAM radio instead of a CB because of the ruggedness and distance that we travel.
Sent from my SM-G900V using Tapatalk
though I do agree with the statement about HAM radio, we safety get away with out by traveling in groups, I also personally have a InReach though luckily I have not had to use it for an emergency situation, the one Emeregncy situation we had we were actually still in cell range. I might just make the class, I just need to look at my schedule, that's a big time requirement but I prefer class room teaching instead of self taught.
CB Install and testing party - Dan Cole - 13 Mar 16
I have an InReach too and thankfully I've never had to use it for an emergency as well. I've noticed that there is a lag in messages from the InReach. The HAM gives instant feedback. Its just another tool for your kit bag. The audio quality is also much much better than on a CB, typically.
Sent from my SM-G900V using Tapatalk
CB Install and testing party - akram - 13 Mar 16
Is the class each of those days or is it a 1 day course available each of those days? I've been interested in becoming a HAM operator for some time.
CB Install and testing party - Dan Cole - 14 Mar 16
I believe that it is each of those days. I know it's an investment of time but the alternative is just memorizing the practice tests... And that would take longer.
Sent from my SM-G900V using Tapatalk
CB Install and testing party - akram - 14 Mar 16
Yeah I know and it'd be worth it for sure. Unfortunately I already a commitment during that time every Saturday.
CB Install and testing party - Dan Cole - 14 Mar 16
Bummer. Well they will offer it again. And there's always the blunt force study method. Or you can just bring along someone will already has a license! 😉
Sent from my SM-G900V using Tapatalk
CB Install and testing party - AKMark - 14 Mar 16
I wish I had the time. I don't have time to even wrench on the rig right now.