+- Arctic Offroad Forums (http://www.arcticoffroad.com)
+-- Forum: Talk (http://www.arcticoffroad.com/forumdisplay.php?fid=3)
+--- Forum: General 4X4 (http://www.arcticoffroad.com/forumdisplay.php?fid=9)
+--- Thread: Need Help (/showthread.php?tid=2488)
Need Help - Angler - 19 May 08
I am trying to get this project finished up before Iraq and need some help, I will be working on this thing this weekend,
things that need to be done
wiring, dash needs to be reinstalled
fuel pump, fuel cell need to be installed
steering box needs to be moved forward 3 inches
cab mounts need to be mover to match new cab
t-case needs to be removed so I can rebuild/regear it
all hard lines for brakes and clutch, fuel need to be bolted back in
bed, rear bumper needs fabbed up
front clip from turd needs to be removed and installed on new rig
hole needs to be cut in the for shifters, also hole need s to be cut for clutch mastercylinder
got alot of little stuff that I could use help on and time is getting really short, I am going to NTC the whole month of july then going to florida for 2 weeks in aug then deploying around sept. any help would be apreciated.
I know there is a ride on sat so sunday would be good but I will be trying to knock as much out as I can over the 4 day weekend.
Need Help - 99TJ - 19 May 08
Count me in, what day?
Need Help - Angler - 19 May 08
Sunday would be great say around 10 ish burgers and brats hit the grill around 2, the truck is here at myplace in birchwood
Need Help - Zukman - 20 May 08
I should be there sunday too.
Need Help - 99TJ - 20 May 08
Won't be avaialbe till after 12 on sunday, but will be there after that
Need Help - Angler - 23 May 08
99TJ Wrote:Won't be avaialbe till after 12 on sunday, but will be there after that
I have to pull CQ saturday night so I am goint to hold the wrenching off till 12:00 on Sunday.
the Adress is
621 wainwright rd
Fairbanks 999701
go down trainer gate rd to "G" street turn rright take to stop sign bear right, go to Wainwright rd take right follow around house is on right it has Old glory flying in front.
Need Help - Mrs. Angler - 24 May 08
Would like to have a head count on who will be here so I have enough food for everyone. So calling all who's avalible. Jeff's been there to help others who needed it when he could.
Need Help - 99TJ - 24 May 08
I'm there
Need Help - Zukman - 24 May 08
I'm there.
Need Help - Angler - 24 May 08
if anyone has any 1 1/8 inch hole saw they could bring it would be a great help
Need Help - arcticmutt - 24 May 08
You know well be there and I will write myself a note to try and remember the hole saw I think that I have one
Need Help - ChevyKev - 25 May 08
Wish I could help, but Sundays I'm a bit busy!
Need Help - Angler - 27 May 08
I am going to try to have another work party on Saturday ,I really think one more day like we had Sunday and this thing could be rolling,
List of things still need to do
install rear shocks
swap over brake lines, calipers, brake pads from doner truck
cut hole on floor for shifters
install front shock hoops and shocks
fab fuel pump mount and install
install fenders, head lights
install toolbox/fuel cell
final weld body mounts
remove, paint, grease, reinstall control arms
odds and ends
any help would be appreciated
Need Help - ChevyKev - 27 May 08
Just a reminder: Saturday is the Swap meet.
As well, I will be in the lower 48
Need Help - Angler - 31 May 08
not working on the rig today, somethings came up.
Need Help - Angler - 20 Jun 08
I will be wrenching on the rig today all day if anyone is bord and wants to stop by.