Arctic Offroad Forums

Tonight about 8:30 Mark and I will be dropping the 6.2 into his burb. it is ready to go. Need to fix a few transmission lines and then in she goes. Any help would be appreciated.

I won't make Church Kev, but I will be there before 8:30.

I'll be down there. Not sure how long I can stay yet. Morning comes real early for me tomorrow.

You rock, any help will be greatly appreciated.

Here's what's left, (I probably forgot something, but I'm sure Kev will correct me.)

1. Drop in the motor. (Installing motor mount bolts and trans to motor as well as Torque converter bolts)
2. Install exhaust manifolds
3. Install flywheel cover
4. Install auxiliary trans cooler
5. Install radiator
6. Install radiator fan and shroud
7. Install radiator lines
8. Plug in wires
9. Install cruise control diaphragm
10. Install EGR valve/air cleaner assembly
11. Install power steering pump - lines are still connected
12. Install A/C pump - lines are still connected
13. Connect oil cooler lines
14. Top off all fluids
15. Crack open injector lines
16. Connect fuel lines
17. Connect batteries
18. Crank till fuel is noticed at injector lines
19. Install glow plugs
20. Check everything one more time, and hopefully it starts right up.